Pneumatic Fluidizing Conveyor Medium The Woven Type Airslide Fabric Belt

• Type: Customized
• Material: Polyester, Cotton
• Inside Material: Polyester, Cotton
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: RIQIP
• Feature: Tear-Resistant, Heat-Resistant, Wear-Resistant
• Tensile Strength: Strong
• Weight: 3500GSM to 5000GSM
• Thickness: 4.5mm, 6mm, 8mm
• Width: 100mm to 2800mm
• Customized: Yes
• Transport Package: Standard Export Package
• Specification: customized size
• Trademark: RUIQI
• Origin: China
• HS Code: 591140000
• Production Capacity: 5000m/Week
• Package Size: 30.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 2.000kg

Product Description

Pneumatic fluidizing conveyor medium the woven type Airslide fabric belt

 

Specification data:

 

Raw Material =100% spun fiber polyester

Weight in average = 4000 g/m²
Thickness = 5mm
Mean Air Permeability = 400 m³/m²h @350H₂O

Pressure: 2000pa for middle air resistance

                   4000pa for high air resistance

Breaking Strength- Warp=>6000 N/5cm X 20cm
Breaking Strength- Weft= >3000 N/ 5cm X 20cm
Breaking Elongation - warp=<5%
Breaking Elongation -weft=<5%

Max Width: 2800mm

Operating Temperature  < 150 deg.C
Recommended Maximum Continues <180 deg.C
Recommended Maximum Surge = 180 deg.C

INTRODUCTION

We provide Airslide belt for conveying bulk material by air gravity. The main use of Airslide belt is discharging, declining transportation or homogenizing the powder or small granular material in quiescent condition. Our airslide belt is named as Airslide fabric, Airslide membrane, Air slide cloth, Air slide canvas, Air permeable fabric, and Fluidization cloth, fluidising fabric, etc by our customer. We adopt 100% polyester for airslide fabric material. 
 

Our fabrics can be used at temperatures between -60°C and +150°C. The airslide fabrics are made from polyester yarns. We are also, however, able to weave fabrics to our customers' specific demands for air permeability and mechanical strength.
 

Advantages

• No moisture absorption
• No caking
• Resistant to rotting and decomposition
• Complete unloading without residues
• Consistent fluidization over the complete surface
• Good resistance to abrasion
• Low wear and therefore longer life
• Low shrinkage even when used under hot and humid conditions

 

Working principle

In cement plant: 

An Airslide belt is in the middle of a chute. Powder material will come into the chute above Airslide belt. Material will flow to the chute lower side as pneumatic blower down Airslide belt. That's why we say Airslide belt can move powder material because of the wind power. And then, the rest wind will go out from the top of the chute. Through the moving, no parts moved except powder material. So that it can spare more energy and maintain cost, etc.

In fluidization silo:

Our Airslide canvas is installed on the surface of the silo bottom. It is supplied for installation as aeration units on the sloped conical bottoms of bins and silos to aid in the withdrawal of dry relatively free-flowing material.

Each Airslide aeration unit package consists of 200mm open-type. Airslide conveyor units in lengths of 1.5 or 3m depend on the slope length of the conical storage area. Some spoke patterns are normally used with materials which have good fluidization characteristics. Others spoke patterns provide maximum aeration for difficult materials which can be fluidized.
 

In cement vessel's hold:

The sloped bottom of the cargo hold is covered with fluidizing panels. Our airslide fabric is on the surface of fluidizing panels. Rotary piston blowers supply the panels with oil-free compressed air and make the cement flow to the lowest point, where the discharge gate is installed.  Powder and particulate material available the Airslide canvas fabric conveyor belt

Application:

In industry

Power Stations
Filtered dust 
Flue ash, discharging flue ash 
Coal dust 
Building and Construction 
Cement, furnace dust, gypsum, limestone, finely ground quartz, 
Calcium hydroxide, lead monoxide, quicklime, acid crystals, 
Pure clay, phosphates, magnesite concentrate, finely ground 
fluorid, production of aluminum 
Chemical Industry 
Thomas meal (Fertilizer) 
Rubber compounds, sinter dust, catalysts 
Sodium sulfate 
Soap powder

 

In machinery:

Silos / Tanks 
Discharging systems 
Warehouse units 
Mixing equipment 
Homogenizing systems 
Chute Bottoms 
Conveyor systems 
Ventilator systems 
Aeration systems 
Vehicles 
Silo truck discharging cones 
Railway wagon discharging cones 
Vessel aeration & discharging bottoms 
Container aeration & discharging bottoms 
Powder Coating Machinery 
Bottoms for sinter basin